FISHER LABS TEKNETICS GARRETT BOUNTY HUNTER BLISSTOOL LINDNER WHITES MD DETECTORS XP METAL DETECTORS

   







Metaldetector Teknetics Omega 8000 MEGA


1,200лв.  980лв.

  • Model: Teknetics Omega 8000 MEGA
  • Shipping Weight: 4lbs
  • Manufactured by: TEKNETICS
Add to Cart:


Metaldetector Teknetics Omega 8000 MEGA is well known to all Teknetics Omega 8000 (with base 25cm. Concentric circular water impervious search coil), but in addition to 38cm. x 30cm. DD  S.E.F. search coil. Additional 38cm. x 30cm. DD  S.E.F. increasing depth search coil of the metal detector, about 30%, while maintaining discrimination and speed of work.

Metaldetector Teknetics Omega 8000 MEGA has the following characteristics:
- 10 "(25 cm.) concentric oblong shape, water impervious search coil:
a detector supplied with this probe makes it very accurate in determining the type of metal detecting.
- 15 "x12" (38cm. x 30cm.) DD S.E.F. water impervious search coil.
- LCD display: the display is large enough to be able to see all the features and simultaneous readings at any time.
- Operating frequency: 7.8 kHz. - The frequency of operation allows it to open with the same ease as small and larger metal objects.
- Working Principle: VLF.
- Modes: The detector has three modes of operation:
1. Discrimination (DISC) -
This modeis used to ignore signals from unnecessary metal objects in the ground. This mode is enabled when running the detector default and is usually used for continuous search for certain groups of metals (ie, select from the menu which groups respond metal detector). In order to detect it and indetifitsirate metal must move taseshtite probe. Identification of the detected metal in mode discrimination is in three ways: through sound, sight and ID indicator.
2. All metals (AT) - This mode is used to search for all metals (ie you can not choose from a menu which groups respond metal detector) and is deeper than mode discrimination. In order to detect it and indetifitsirate metal must move taseshtite probe. Identification of the detected metal in mode discrimination in two ways (visual only. Beep on detection of various metals is the same)
3. Just lokalizilane (PinPoint) - This mode is used to locate the exact location of the detected metal. In this mode, to detect metal need not move searching coil (ie until there metal in the search probe - device will beep). Pin Point mode can switch at any time to work whether you're working or in standby mode DISCRIMINATE ALL METALS. The identification of the detected metal in this mode is impossible.
- FREQ - button to change the frequency of operation of the detector, in order to avoid electrical interference.
- Ground Balance - GNG GRAB (Automatic and Manual Ground Balance) - to ignore signals from minerals contained in the land feature detector is designed for manual and automatic removal of such signals.
- Sensitivity (SENS) - when you turn the sensitivity of the detector is set at 70% of maximum. With the span to achieve maximum working depth and prevent false alarms caused by electromagnetic interference.
- The level of discrimination (DISC) - is used to increase or decrease the level of discrimination. When a category identifier disappear (eg / IRON /), then metal falling into this category are not detected by the detector.
- Selective discriminated METALS / NOTCH / - unlike the function DISC, which include or exclude categories consistently metals, the function / NOTCH / allows to selectively include or exclude a category of metals only.
- Identification of metal detecting - The ability of the detector to determine the exact nature of the detected metal is directly related to the size of the metal and its distance from the search coil. At a distance of 20 cm above the metal of the search coil, precision type found metal decreases. Identification is in three ways:
1. by sound (different sounds for different types of metals that you can choose the function tones (TONES)) - In this function, the different categories are identified metals with different colors, allowing you to determine the type of metal, without looking at the display. When the detector, the default setting is level 3. Depending on the chosen level of function (levels are from 1 to 4) metal detector responds as follows:
LEVEL:
        d1 - the first all-metal sound - high or medium-high sound that changes with increasing signal strength. Same metal when it is close to the search coil will emit a high tone, and when away from the probe - low tone. The volume is always shifted in proportion to the signal. Kolgoto is closer to the metal tube search, the more powerful sound.
        d2 - Volume 2 - Iron will react with bass, regardless of the signal level, other metals will react as in d1.
        d3 - 3 different sound - bass to zelyazoto; Low sound stanyol, aluminum and zinc, High sound for 10 or 25 cent coin.
        d4 - 4 different sound - bass to zelyazoto; Low sound stanyol, aluminum and zinc; Average sound for 5 cent coin, High sound for 10 or 25 cent coin.
In ALL METAL mode / AT /, if pressed concrete TONES, promnyate can only pitch (for all metals mode signal is the same for all types of metals) from A1 to A4.
2. Visual - found metal identify visually display the detector by illuminating an icon reflecting the group metals. When detecting metal detector reacted by illuminating an icon (indicator group metals). The display shows the scale of 8 icons (indicators) covering groups of 8 metals (IRON, FOIL, NICKEL, P-TAB, S-CAP, ZINC, DIME, and QTR).
3. TARGET ID - accurate visual identification by two digit indicator (ID metal from 10 to 99), located in the middle of the display, which gives a precise figure for the detection of a metal. Keep in mind that the size and shape of the metal vliayat the readings of the meter ID.
- An indicator of the depth of the detected metal. Depth indicator is located in the bottom center of the display. The depth is measured in inches (1 inch = 2.54 cm). Depth indicator gives correct readings metal objects the size and shape of a coin. Teknetics Omega 8000 metal detector detects metal the size of a coin such as a quarter, a depth of about 28 cm from the search head. Higher metals can be found at a depth of 1 meter. The ability of a metal detecting metal detector is directly related to the size of the metal. The larger is the size of the metal, the deeper it will detect metal detector .. At a distance of 20 cm above the metal precision of the depth of the detected metal decreases.
- Indicator Fe3O4, which is located at the top right of the display and is used to measure and display the level of magnetism (magnetic mineralization of soil).
- Power - Battery 1pc. 9V (included not included) - the duration of operation of the metal detector with 1 pc. 9V alkaline battery is 20 to 25 hours. The battery condition is monitored continuously by trisegmentov indicator at the bottom right of the display.
- Headphone - If you want to use headphones during the search, the detector is equipped with two headphone outputs 1/8 and 1/4 inches (located on the left side of the control box). When you connect headphones, the signal from the instrument will be heard only in the headphones. Do not use headphones more than 3 m cable.
- Weight - 1.5 kg. Battery.
- Operating temperature: -20 ° C to +50 oC.
- Humidity: 0 to 90 percent without direct condensation.
- Adjustable armrest.
- Manual - Bulgarian and English.
- Made in the USA.
- 5 year warranty.





ПРЕДИМСТВАТА ДА КУПИТЕ ОТ НАС

Сигурност

Не трябва да имате притеснение да пазарувате от нас виртуално – през интернет, защото: [повече...]
Доставка

Най-често струва само около 5 лева и се извършва в срок до 4 работни дни до всеки град в България. [повече...]
Гаранция

Ние Ви предлагаме професионална гаранционна и извънгаранционна поддръжка и сервиз. [повече...]



Можете да поръчате този продукт веднага на телефон: +359 878 548 849