FISHER LABS TEKNETICS GARRETT BOUNTY HUNTER BLISSTOOL LINDNER WHITES MD DETECTORS XP METAL DETECTORS

   







Metal detector Teknetics Delta 4000 ULTIMATE


720лв.  610лв.

  • Model: Teknetics Delta 4000 ULTIMATE
  • Shipping Weight: 4lbs
  • Manufactured by: TEKNETICS
Add to Cart:


Metaldetector Teknetics Delta 4000 ULTIMATE is well known to all Metaldetector Teknetics Delta 4000 (with base 20cm. Concentric circular water impervious search coil), but in addition to 33 cm. DD ULTIMATE search coil. Additional 33 cm. DD ULTIMATE increasing depth search coil of the metal detector, about 30%, while maintaining discrimination and speed of work.

Metaldetector Teknetics Delta 4000 ULTIMATE has the following characteristics:
- 8 "(20 cm) concentric circular water impervious search coil: a detector supplied with this probe makes it very accurate in determining the type of metal detecting.
- 13" (33sm..) DD ULTIMATE water impervious search coil.
- LCD display: the display is large enough to be able to see all the features and simultaneous readings at any time.
- Operating frequency: 7.8 kHz. - The frequency of operation allows it to open with the same ease as small and larger metal objects.
- Working Principle: VLF.
- Modes: The detector has three modes of operation:
1.
Discrimination (DISCRIMINATE) - This mode is used to ignore signals from unnecessary metal objects in the ground. This mode is enabled when running the detector default and is usually used for continuous search for certain groups of metals (ie, select from the menu which groups respond metal detector). In order to detect it and indetifitsirate metal must move taseshtite probe. Identification of the detected metal in mode discrimination is in three ways: through sound, sight and ID indicator.
2. All metals (ALL METALS) - This mode is used to search for all metals (ie you can not choose from a menu which groups respond metal detector) and is deeper than mode discrimination. In order to detect it and indetifitsirate metal must move taseshtite probe. Identification of the detected metal in mode discrimination in two ways (visual only. Beep on detection of various metals is the same)
3. Just lokalizilane (PinPoint) - This mode is used to locate the exact location of the detected metal. In this mode, to detect metal need not move searching coil (ie until there metal in the search probe - device will beep). Pin Point mode can switch at any time to work whether you're working or in standby mode DISCRIMINATE ALL METALS. The identification of the detected metal in this mode is impossible.
- Automatic Ground Balance - to ignore signals from minerals contained in the ground in the detector is provided for auto remove such signals (ie, the detector has a built-in automatic ground balance). This function without presetting.
- Sensitivity (SENSITIVITY) - when you turn the sensitivity of the detector is set at 70% of maximum. With the span to achieve maximum working depth and prevent false alarms caused by electromagnetic interference.
- The level of discrimination (DISC. LEVEL) - used to increase or decrease the level of discrimination. When a category identifier disappear (eg / IRON /), then metal falling into this category are not detected by the detector.
- Selective discriminated METALS / NOTCH / - unlike the function DISC. LEVEL, which include or exclude categories consistently metals, the function / NOTCH / allows to selectively include or exclude a category of metals only.
- VOLUME (VOLUME) - able to adjust the sound produced by the detector. When the detector volume by default is set to level 8. The maximum level is 10. The lowest value is 0 (the sound is turned off). Levels 1,2, and 3 signals with high tones are not heard or hear very quiet. Volume decreased by reducing battery power.
- Identification of metal detecting - The ability of the detector to determine the exact nature of the detected metal is directly related to the size of the metal and its distance from the search coil. At a distance of 20 cm above the metal of the search coil, precision type found metal decreases. Identification is in three ways:
1. by sound (different sounds for different types of metals) - low volume for steel and iron objects like nails and tin cans and bottles steel rings, between the sound of new zinc coins larger articles of gold, small items of brass and most bottle tops and foil aluminum tabs on cans, LOUD SOUND for silver and copper coins, large objects made of brass, old coins (produced before 1982 minted copper), silver dollars.
2. Visual - found metal identify visually display the detector by illuminating an icon reflecting the group metals. When detecting metal detector reacted by illuminating an icon (indicator group metals). The display shows the scale of 8 icons (indicators) covering groups of 8 metals (IRON, FOIL, 5 $, ALUM, ZINC, DIME, QTR, and $ 50), which are located at the bottom of the display.
3. TARGET ID - accurate visual identification by two digit indicator (ID metal from 10 to 99), located in the middle of the display, which gives a precise figure for the detection of a metal. Keep in mind that the size and shape of the metal vliayat the readings of the meter ID.
- An indicator of the depth of the detected metal. The relative depth of the detected metal in dyasnatata notes of the display, a 5-segment indicator of depth. Depth indicator gives correct readings metal objects the size and shape of a coin. Teknetics Delta 4000 metal detector detects metal the size of a coin such as a quarter, a depth of about 28 cm from the search head. Higher metals can be found at a depth of 1 meter. The ability of a metal detecting metal detector is directly related to the size of the metal. The larger is the size of the metal, the deeper it will detect metal detector .. At a distance of 20 cm above the metal precision of the depth of the detected metal decreases.
- Power - Battery 1pc. 9V (not included) - the duration of operation of the metal detector with 1 pc. 9V alkaline battery is 20 to 25 hours. The battery condition is monitored continuously by trisegmentov indicator at the bottom right of the display.
- Headphone - If you want to use headphones during the search, the detector is equipped with two headphone outputs 1/8 and 1/4 inches (located on the left side of the control box). When you connect headphones, the signal from the instrument will be heard only in the headphones. Do not use headphones more than 3 m cable.
- Weight - 1.6 kg. Battery.
- Operating temperature: -20 ° C to +50 oC.
- Humidity: 0 to 90 percent without direct condensation.
- Adjustable armrest.
- Manual - Bulgarian and English.
- Made in the USA.
- 5 year warranty.





ПРЕДИМСТВАТА ДА КУПИТЕ ОТ НАС

Сигурност

Не трябва да имате притеснение да пазарувате от нас виртуално – през интернет, защото: [повече...]
Доставка

Най-често струва само около 5 лева и се извършва в срок до 4 работни дни до всеки град в България. [повече...]
Гаранция

Ние Ви предлагаме професионална гаранционна и извънгаранционна поддръжка и сервиз. [повече...]



Можете да поръчате този продукт веднага на телефон: +359 878 548 849